Placing these heavy boards on the sloped ceiling is very hard work |
I do really enjoy working with plaster, though, it is fun, although difficult to get it perfect with the little experience I have.
|
|
5 radiators are up, 3 to go |
So we will probably start the heating system when the workshop radiator is installed, to heat the house up, and leave the rest for later.
Installing gas pipes, cool threading machine on the right |
In order to install the kettle, the natural gas pipes had to be brought up to the workshop in the attic from the basement. For this Pim got help from a professional and they installed it in two days and then tested it for leaks.
Installing the warm water and heating system |
Then he started connecting the water pipes to the kettle and the collectors. A single kettle takes care of the warm water as well as the central heating.
"Library" |
I like the above image since it shows all the "layers" of the work we are doing on the walls. You see the wooden studs, the yellow glass fiber sound insulation, the polyurethane boards with plasterboard on top (and first stages of plaster finishing of the joins and covering of screws), the water and heating pipes, the electricity cables, and the gas pipe.
We caught a good deal at the DIY shop on some tiles we had been eyeing for the bathroom, so we bought them:
Bathroom tiles |
I was actually leaning towards flat oblongs for a plainer look, while Pim liked a bezel more. These have a very faint bezel, and everyone is happy. We bought 44 boxes with 44 tiles each.
I also finally found a suitable, cheap second hand chandelier (originally from Ikea) to use as a base for my bedroom lamp project. I have already started working on it... I'll have a dedicated post for it later!
As usual... the pictures are pretty bad. In fact, slightly more so than usual, since I have dropped my camera and the zoom lens is a bit broken, so we had to use our mobile phones to take pictures.
I also finally found a suitable, cheap second hand chandelier (originally from Ikea) to use as a base for my bedroom lamp project. I have already started working on it... I'll have a dedicated post for it later!
As usual... the pictures are pretty bad. In fact, slightly more so than usual, since I have dropped my camera and the zoom lens is a bit broken, so we had to use our mobile phones to take pictures.